Mutation breeding of high-stress resistant strains for succinic acid production from corn straw.

The production of succinic acid from corn stover is a promising and sustainable route; however, during the pretreatment stage, byproducts such as organic acids, furan-based compounds, and phenolic compounds generated from corn stover inhibit the microbial fermentation process. Selecting strains that are resistant to stress and utilizing nondetoxified corn stover hydrolysate as a feedstock for succinic acid production could be effective. In this study, A. succinogenes CICC11014 was selected as the original strain, and the stress-resistant strain A. succinogenes M4 was obtained by atmospheric and room temperature plasma (ARTP) mutagenesis and further screening. Compared to the original strain, A. succinogenes M4 exhibited a twofold increase in stress resistance and a 113% increase in succinic acid production when hydrolysate was used as the substrate. By conducting whole-genome resequencing of A. succinogenes M4 and comparing it with the original strain, four nonsynonymous gene mutations and two upstream regions with base losses were identified. KEY POINTS: • A high-stress-resistant strain A. succinogenes M4 was obtained by ARTP mutation •  The production of succinic acid increased by 113% • The mutated genes of A. succinogenes M4 were detected and analyzed.

3D printed cinnamon essential oil/banana peel carbon dots loaded corn starch/gelatin bilayer film with enhanced functionality for food packaging application.

Using 3D printing technology, a gelatin-polyvinyl alcohol­carbon dots (GPC) layer+corn starch-polyvinyl alcohol-cinnamon essential oil (CPC) layer active bilayer film with an external barrier function and an internal controlled-release effect was successfully produced for food preservation. The GPC film was provided with potent antioxidant and UV blocking properties by the banana peel carbon dots (CDs). The cinnamon essential oil (CEO) had the strongest interaction with the film matrix at 3% (w/w), causing the CPC film having the lowest surface wettability, good integrity, and lowest crystallinity. The CEO's stability and releasing effectiveness were greatly enhanced by the creation of a bilayer film. At 60% filling rate of the CPC layer, the bilayer film showed the highest CEO retention after drying and the best CEO release performance. Finally, the created active bilayer film was found to significantly improve the sensory quality stability of the spicy essential oil microcapsule powders. It also successfully extended the mangoes' shelf life by delaying browning and rot.

Indophenol Blue Colorimetric Method to Determine Grain Protein Content of Cereal Plants.

Here, we propose a method to convert the organic nitrogen in maize kernels into ammonia in solution and then chlorinate it to prepare monochloride salts, which can form an oxidatively coupled blue-green mixture with sodium salicylate and sodium dichloroisocyanurate. The concentration of ammonium ions in the blue-green mixture can then be determined in the solution, and finally the protein content in maize kernels can be calculated from the nitrogen content.

[Comparison of DNA Extraction Methods for Processed Foods Containing Soybean or Maize].

Processed foods containing soybean or maize are subject to labeling regulations pertinent to genetically modified (GM) foods in Japan. To confirm the reliability of the labeling procedure of GM foods, the Japanese standard analytical methods (standard methods) using real-time PCR technique have been established. Although certain DNA extraction protocols are stipulated as standard in these methods, the use of other protocols confirmed to be equivalent to the existing ones was permitted. In this study, the equivalence testing of the techniques employed for DNA extraction from processed foods containing soybean or corn was conducted. In this study, the equivalence testing of the techniques employed for DNA extraction from processed foods containing soybean or maize was conducted. The silica membrane-based DNA extraction kits, GM quicker 4 and DNeasy Plant Maxi Kit (Maxi Kit), as an existing method were compared. GM quicker 4 was considered to be equivalent to or better than Maxi Kit.

Phenolic Characterization of a Purple Maize (Zea mays cv. "Moragro") by HPLC-QTOF-MS and Study of Its Bioaccessibility Using a Simulated In Vitro Digestion/Caco-2 Culture Model.

The present work aimed to characterize the phenolic and antioxidant content of the Argentinian purple maize "Moragro" cultivar. Additionally, the INFOGEST simulated in vitro digestion model was used to establish the effect of digestion on bioactive compounds. Finally, digestion samples were used to treat Caco-2 cells in the transwell model to better understand their bioavailability. Twenty-six phenolic compounds were found in purple maize cv. "Moragro", 15 nonanthocyanins and 11 anthocyanins. Several compounds were identified in maize for the first time, such as pyrogallol, citric acid, gallic acid, kaempferol 3-(6″-ferulylglucoside), and kaempferol 3-glucuronide. Anthocyanins accounted for 24.9% of total polyphenols, with the predominant anthocyanin being cyanidin-3-(6″ malonylglucoside). Catechin-(4,8)-cyanidin-3,5-diglucoside and catechin-(4,8)-cyanidin-3-malonylglucoside-5-glucoside were detected as characteristics of this American maize variety. Total polyphenol content (TPC; by the Folin-Ciocalteu method), HPLC-DAD/MSMS, and antioxidant activity [by DPPH and ferric-reducing antioxidant power (FRAP)] were evaluated throughout in vitro digestion. TPC, DPPH, and FRAP results were 2.71 mg gallic acid equivalents (GAE)/g, 24 µmol Trolox equiv/g, and 22 µmol Trolox eq/g, respectively. The in vitro digestion process did not cause significant differences in TPC. However, the antioxidant activity was significantly decreased. Moreover, the bioavailability of anthocyanins was studied, showing that a small fraction of polyphenols in their intact form was conserved at the end of digestion. Finally, a protective effect of digested maize polyphenols was observed in the Caco-2 cell viability. The results suggest that "Moragro" purple maize is a good source of bioavailable anthocyanins in the diet and an interesting source of this group of compounds for the food industry.

Bioactive Compounds from Pigmented Corn (Zea mays L.) and Their Effect on Health.

Pigmented corn is a gramineae food of great biological, cultural and nutritional importance for many Latin American countries, with more than 250 breeds on the American continent. It confers a large number of health benefits due to its diverse and abundant bioactive compounds. In this narrative review we decided to organize the information on the nutrients, bioactive compounds and phytochemicals present in pigmented corn, as well as their effects on human health. Phenolic compounds and anthocyanins are some of the most studied and representative compounds in these grasses, with a wide range of health properties, mainly the reduction of pro-oxidant molecules. Carotenoids are a group of molecules belonging to the terpenic compounds, present in a large number of pigmented corn breeds, mainly the yellow ones, whose biological activity incorporates a wide spectrum. Bioactive peptides can be found in abundance in corn, having very diverse biological effects that include analgesic, opioid and antihypertensive activities. Other compounds with biological activity found in pigmented corn are resistant starches, some fatty acids, phytosterols, policosanols, phospholipids, ferulic acid and phlobaphenes, as well as a great variety of vitamins, elements and fibers. This review aims to disseminate and integrate the existing knowledge on compounds with biological activity in pigmented corn in order to promote their research, interest and use by scientists, nutrition professionals, physicians, industries and the general population.

Effects of different oil additives on water resistance of corn starch straws.

To investigate the effect of oil additives on improving the water resistance of corn starch straws, corn oil (CO), soybean oil (SO), rapeseed oil (RO), peanut oil (PO), lard (LD) and coconut oil (CCO) were chosen and compared the structure and properties of starch straws with different oil additives. Corn starch straws (CS), and starch straws supplemented with CO, SO, RO, PO, LD and CCO were prepared by thermoplastic extrusion. The results showed that the incorporation of oils effectively enhanced the water resistance of starch straws such as water absorption, water solubility and water swelling performance. Meanwhile, the flexural strength of starch straws significantly increased. There was no significant linear relationship among starch chain length, oil unsaturation and straw performance. Among seven starch straws, S-SO had the strongest hydrogen bond interaction (3289 cm-1) and relaxation time (0.96 ms). The S-CO had the highest relative crystallinity (16.82 %) and degree of double helix (1.535), hence resulting in the lowest water absorption and solubility values, the highest flexural strength (23.43 MPa), the highest ΔT value (9.93 °C) and ΔH value (4.79 J/g). S-RO had the highest thermal transition temperatures.

Combined dilute alkali and milling process enhances the functionality and gut microbiota fermentability of insoluble corn fiber.

In this study, we developed a process combining dilute alkali (NaOH or NaHCO3) and physical (disk milling and/or ball milling) treatments to improve the functionality and fermentability of corn fiber. The results showed that combining chemical with physical processes greatly improved the functionality and fermentability of corn fiber. Corn fiber treated with NaOH followed by disk milling (NaOH-DM-CF) had the highest water retention (19.5 g/g), water swelling (38.8 mL/g), and oil holding (15.5 g/g) capacities. Moreover, NaOH-DM-CF produced the largest amount (42.9 mM) of short-chain fatty acid (SCFA) during the 24-hr in vitro fermentation using porcine fecal inoculum. In addition, in vitro fermentation of NaOH-DM-CF led to a targeted microbial shifting to Prevotella (genus level), aligning with a higher fraction of propionic acid. The outstanding functionality and fermentability of NaOH-DM-CF were attributed to its thin and loose structure, decreased ester linkages and acetyl groups, and enriched structural carbohydrate exposure.

A preparation of debranched waxy maize starch derivatives: Effect of drying temperatures on crystallization and digestibility.

The impact of recrystallization conditions and drying temperatures on the crystallization and digestibility of native waxy maize (Zea mays L.) starch (NWMS) was explored. This study involved subjecting NWMS to concurrent debranching and crystallization at 50 °C for up to 7 days. Samples were collected by oven-drying at 40, 60, and 80 °C for 24 h. This simultaneous debranching and crystallization process increased the resistant starch (RS) content by approximately 48 % compared to the native starch. The drying temperatures significantly influenced the RS content, with samples dried at 60 °C exhibiting the lowest digestibility. X-ray diffraction (XRD) analysis revealed that most crystals demonstrated a characteristic A-type arrangement. Debranching and crystallization processes enhanced the crystallinity of the samples. The specific crystal arrangement (A- or B-type) depended on the crystallization conditions. A 15 min heating of NWMS in a boiling water bath increased the digestible fraction to over 90 %, while the samples subjected to debranching and crystallization showed an increase to only about 45 %. A linear correlation between starch fractions and enthalpy was also observed.

Improving saccharification efficiency of corn stover through ferric chloride-deep eutectic solvent pretreatment.

An effective deep eutectic solvent (DES) and Iron(III) chloride (FeCl3) combination pretreatment system was developed to improve the removal efficiency of lignin and hemicellulose from corn stover (CS) and enhance its saccharification. N-(2-hydroxyethyl)ethylenediamine (NE) was selected as the hydrogen-bond-donor for preparing ChCl-based DES (ChCl:NE), and a mixture of ChCl:NE (60 wt%) and FeCl3 (0.5 wt%) was utilized for combination pretreatment of CS at 110 ℃ for 50 min. FeCl3/ChCl:NE effectively removed lignin (87.0 %) and xylan (55.9 %) and the enzymatic hydrolysis activity of FeCl3/ChCl:NE-treated CS was 5.5 times that of CS. The reducing sugar yield of pretreated CS was 98.6 %. FeCl3/ChCl:NE significantly disrupted the crystal structure of cellulose in CS and improved the removal of lignin and hemicellulose, enhancing the conversion of cellulose and hemicellulose into monomeric sugars. Overall, this combination of FeCl3 and DES pretreatment methods has high application potential for the biological refining of lignocellulose.

Extraction, recovery, and characterization of lignin from industrial corn stover lignin cake.

Lignin utilization in value-added co-products is an important component of enabling cellulosic biorefinery economics. However, aqueous dilute acid pretreatments yield lignins with limited applications due to significant modification during pretreatment, low solubility in many solvents, and high content of impurities (ash, insoluble polysaccharides). This work addresses these challenges and investigates the extraction and recovery of lignins from lignin-rich insoluble residue following dilute acid pretreatment and enzymatic hydrolysis of corn stover using three extraction approaches: ethanol organosolv, NaOH, and an ionic liquid. The recovered lignins exhibited recovery yields ranging from 30% for the ionic liquid, 44% for the most severe acid ethanol organosolv condition tested, and up to 86% for the most severe NaOH extraction condition. Finally, the fractional solubilities of different recovered lignins were assessed in a range of solvents and these solubilities were used to estimate distributions of Hildebrand and Hansen solubility parameters using a novel approach.

Physicochemical and digestive properties of corn starch nanoparticles incorporated different polyphenols.

The corn starch nanoparticles were prepared by incorporating three kinds of polyphenols, including quercetin, proanthocyanidins and tannin acid. The physicochemical and digestive properties of corn starch nanoparticles were researched. The quercetin showed a higher complexation index than proanthocyanidins and tannin acid when they complexed with corn starch. The mean size of corn starch quercetin, proanthocyanidins and tannin acid were 168.5 nm, 179.1 nm and 188.6 nm, respectively. XRD results indicated that all the corn starch-polyphenols complex showed V-type crystalline structure, the crystallinity of corn starch-quercetin complex was 19.31 %, which showed more formation of amylose-quercetin single helical formed than the other two starch-polyphenol complexes. In vitro digestion revealed that polyphenols could resist digestion and quercetin increased the content of resistant starch from 23.32 % to 35.24 % and polyphenols can form complexes with starch through hydrophobic interactions or hydrogen bonding. This study indicated the hydrophobic polyphenols had a more significant effect on the digestibility of corn starch. And the cell toxicity assessments demonstrated that all nanoparticles were nontoxic and biocompatible.

Interactions of hsian-tsao polysaccharide with corn starch to reduce its in vitro digestibility.

Hsian-tsao polysaccharide (HP) with preferable bioactivities was used to produce starchy gel foods. This study elucidated how interactions of HP (0-0.6 %, w/v) with gelatinized corn starch (CS, 6 %, w/v) reduced in vitro digestibility of CS. The CS digestibility (82.85 %, without HP) was reduced to 68.85 % (co-heated) and 74.75 % (non-co-heated) when 0.6 % HP was added, demonstrating that HP reduced the CS digestibility to a larger extent under co-heating by both HP-CS interactions and inhibiting digestive enzyme activities by HP which was dominated under non-co-heating. Moreover, when co-heated, HP bonded to the amylose of CS via physical forces with a composite index of 21.95 % (0.4 % HP), impeded CS swelling and promoted CS aggregation with the average particle size increased to 42.95 µm (0.6 % HP). Also, the HP-CS complexes formed strong association network structures that increased their apparent viscosity and digestive fluid viscosity. Additionally, HP enhanced the short-range ordered structure and crystal structure of CS. These results evidenced that HP-CS interactions significantly reduced the CS digestibility by forming physical barriers, viscosity effects, and ordered structures, to hinder the enzymes from accessing starch matrices. This laid a foundation for applying HP to starchy foods with a low predicted glycemic index.

Cellulose de-polymerization is selective for bioethanol refinery and multi-functional biochar assembly using brittle stalk of corn mutant.

As lignocellulose recalcitrance principally restricts for a cost-effective conversion into biofuels and bioproducts, this study re-selected the brittle stalk of corn mutant by MuDR-transposon insertion, and detected much reduced cellulose polymerization and crystallinity. Using recyclable CaO chemical for biomass pretreatment, we determined a consistently enhanced enzymatic saccharification of pretreated corn brittle stalk for higher-yield bioethanol conversion. Furthermore, the enzyme-undigestible lignocellulose was treated with two-step thermal-chemical processes via FeCl2 catalysis and KOH activation to generate the biochar with significantly raised adsorption capacities with two industry dyes (methylene blue and Congo red). However, the desirable biochar was attained from one-step KOH treatment with the entire brittle stalk, which was characterized as the highly-porous nanocarbon that is of the largest specific surface area at 1697.34 m2/g and 2-fold higher dyes adsorption. Notably, this nanocarbon enabled to eliminate the most toxic compounds released from CaO pretreatment and enzymatic hydrolysis, and also showed much improved electrochemical performance with specific capacitance at 205 F/g. Hence, this work has raised a mechanism model to interpret how the recalcitrance-reduced lignocellulose is convertible for high-yield bioethanol and multiple-function biochar with high performance.

Effect of biochar, zeolite and bentonite on physiological and biochemical parameters and lead and zinc uptake by maize (Zea mays L.) plants grown in contaminated soil.

Heavy metals (HMs) are common contaminants with major concern of severe environmental and health problems. This study evaluated the effects of organo-mineral amendments (mesquite biochar (MB), zeolite (ZL) and bentonite (BN) alone and in combination) applied at different rates to promote the maize (Zea mays L.) growth by providing essential nutrient and improving the soil physio-chemical properties under zinc (Zn) and lead (Pb) contamination. Result revealed that the incorporation of organo-mineral amendments had significantly alleviated Pb and Zn contamination by maize plants and improved the physiological and biochemical attributes of plants. Combined application of organo-mineral amendments including BMA-1, BMA-2 and BMA-3 performed excellently in terms of reducing Pb and Zn concentrations in both leaves (19-60%, 43-75%, respectively) and roots (24-59%, 42-68%, respectively) of maize. The amendments decreased the extractable, reducible, oxidisable and residual fractions of metals in soil and significantly reduced the soil DTPA-extractable Pb and Zn. BMA-1 substantially improved antioxidant enzyme activities in metal-stressed plants. This study indicated that combined use of organo-mineral amendments can effectively reduce the bioavailability and mobility of Pb and Zn in co-contaminated soils. Combined application of organo-mineral amendments could be viable remediation technology for immobilization and metal uptake by plants in polluted soils.

Feasibility of replacing waxy rice with waxy or sweet-waxy corn viewed from the structure and physicochemical properties of starches.

To explore the feasibility of substituting waxy rice with waxy or sweet-waxy corn, eight varieties of waxy and sweet-waxy corns were selected, including three self-cultivated varieties (Feng nuo 168, Feng nuo 211, and Feng nuo 10). Their starches were isolated and used as research objects, and commercially available waxy rice starch (CAWR) and waxy corn starch (CAWC) were used as controls. X-ray diffraction, scanning electron microscopy, differential scanning calorimetry, rapid viscosity analyzer, and rotational rheometer were used to analyze their physicochemical and structural characteristics. The morphologies of all corn starch granules were generally oval or round, with significant differences in particle size distributions. All ten starches exhibited a typical A-type crystal structure; however, their relative crystallinity varied from 20.08% to 31.43%. Chain length distribution analysis showed that the A/B ratio of Jing cai tian nuo 18 and Feng nuo 168 was similar to that of CAWR. Peak viscosities of corn starches were higher than that of CAWR, except for Feng nuo 10, while their setback values were lower than that of CAWR. Except for Feng nuo 10, the paste transparency of corn starches was higher than that of CAWR (10.77%), especially for Jing cai tian nuo 18 (up to 24%). In summary, Jing cai tian nuo 18 and Feng nuo 168 are promising candidates to replace CAWR in developing various rice-based products.

Binary blends of normal corn starch and cow cockle starch for the slow-thickening behavior upon pasting.

Corn starch with slow thickening property may facilitate more efficient heat transfer and safety of corn starch-thickened foods. Partial substitution of normal corn starch (NCS) with slow-pasting behavior of cow cockle starch (CCS) was hypothesized to impart binary starch blend with slow-thickening effect during hydrothermal heating. To test hypothesis, a series of starch blend dispersions (with weight ratios of CCS to NCS = 75:25, 50:50, 25:75) were prepared at various starch concentrations (6 %, 8 %, 10 %, and 12 %) and subjected to the Rapid Viscosity Analysis (RVA). RVA viscographs of starch blends were compared with that of NCS, suggesting that nearly all starch blends at various concentrations showed longer time span of pasting and lower pasting rate. Although CCS and NCS blend gels exhibited lower Young's modulus and hardness based on textural profile analysis, the sensory panels revealed that 6 % and 8 % starch blend gels (with weight ratio of CCS to NCS = 25:75) showed the mouthfeel analogous to NCS gel. These findings highlight a viable non-chemical modification strategy that enables binary blends of CCS and NCS as a novel gelling agent with slow-pasting property and may aid in safety and high-quality processing of hydrogel foods.

Processing of corn-based dog foods through pelleting, baking and extrusion and their effect on apparent total tract digestibility and colonic health of adult dogs.

Different food processing parameters may alter starch granule structure and its cooking degree. With lower thermomechanical energy, more resistant starch (RS) is retained in the food, which may benefit gastrointestinal (GI) health. The objective of this study was to determine the effect of food processing on dietary utilization and dog gut health. Experimental diets containing 56% corn as the sole starch source were produced through pelleting, baking, and extrusion and compared to a baked control diet in which the corn was replaced with dextrose. The extruded diet resulted in the highest level (P < 0.05) of in vitro starch cook and lowest RS, while baked was intermediate and pelleted had the lowest starch cook and highest RS. To evaluate the in vivo effects of these treatments, 12 dogs were adapted to foods for 9 d, and feces were collected for 5 d in a replicated 4 × 4 Latin square design. Feces were scored for consistency using an ordinal scale, and parametric data included apparent digestibility (ATTD), parameters indicative of gut health, and the microbial composition, which was centered log-ratio transformed before operational taxonomic unit (OTU) analyses. Fecal scores were analyzed by ordinal logistic regression, and parametric data were analyzed as mixed models. Overall ATTD was greater (P < 0.05) in extruded, followed by baked and pelleted. Dogs fed the control had osmotic diarrhea, whereas dogs fed the other treatments had mostly acceptable fecal scores, with extrusion leading to the best fecal quality. The control also led to high fecal pH and low SCFAs, indicating dysbiosis. All corn foods had similar (P > 0.05) fecal SCFAs and extruded tended (P = 0.055) to promote higher fecal butyrate than baked and pelleted. The microbiome of dogs fed the corn foods had similar α diversity indices, and OTUs at the species and phyla levels were mostly alike and different from the control. In conclusion, the higher levels of in vitro RS did not translate into a better in vivo fermentation profile, and extruded kibble performed best regarding fecal quality, ATTD, and fecal SCFAs.

Dog foods were produced via extrusion, baking, and pelleting to yield increasing amounts of starch resistant to digestion (resistant starch [RS]). The foods were compared to a negative dextrose control that contained dextrose in place of starch. Amounts of cooked starch and RS were confirmed by in vitro methodologies. These foods were fed to healthy adult dogs in a Latin square design. Feces were scored for quality and collected to calculate apparent digestibility. Fresh feces were also collected for fecal short-chain fatty acids and microbiome evaluations. The corn-based extruded kibble was more digestible, followed by the baked and pelleted treatments. The extruded treatment produced stools closest to the ideal, but dogs fed the pelleted and baked also produced acceptable feces. The SCFA composition in the feces of dogs fed extruded was like the pelleted treatment, with a higher tendency to produce butyrate. Changes in fermentation were not a consequence of differences in microbiome composition among dogs fed corn-based foods. Dogs fed the control had osmotic diarrhea, with a higher fecal pH and higher proportions of branched-chain fatty acids, which was undesirable. The extruded food performed better overall than baked and pelleted, but they were all acceptable as food forms for dogs.

Harvest Timing of Standing Corn Using Near-Infrared Reflectance Spectroscopy.

Harvesting corn at the proper maturity is important for managing its nutritive value as livestock feed. Standing whole-plant moisture content is commonly utilized as a surrogate for corn maturity. However, sampling whole plants is time consuming and requires equipment not commonly found on farms. This study evaluated three methods of estimating standing moisture content. The most convenient and accurate approach involved predicting ear moisture using handheld near-infrared reflectance spectrometers and applying a previously established relationship to estimate whole-plant moisture from the ear moisture. The ear moisture model was developed using a partial least squares regression model in the 2021 growing season utilizing reference data from 610 corn plants. Ear moisture contents ranged from 26 to 80 %w.b., corresponding to a whole-plant moisture range of 55 to 81 %w.b. The model was evaluated with a validation dataset of 330 plants collected in a subsequent growing year. The model could predict whole-plant moisture in 2022 plants with a standard error of prediction of 2.7 and an R2P of 0.88. Additionally, the transfer of calibrations between three spectrometers was evaluated. This revealed significant spectrometer-to-spectrometer differences that could be mitigated by including more than one spectrometer in the calibration dataset. While this result shows promise for the method, further work should be conducted to establish calibration stability in a larger geographical region.

Butyryl group distribution modulates the structure and properties of butyrylated maize starch focused on amylose contents.

In this study, four types of maize starch with different amylose contents (3 %, 25 %, 40 %, and 70 %) were used to prepare butyrylated starches. Based on amylose contents, the influence of butyryl group distribution on the structure, thermal and digestive properties of butyrylated maize starch was investigated. The butyrylation reaction mainly substituted butyryl groups on amylose, and the butyryl groups were most easily substituted for the hydroxyl group at the C6 position. The degree of substitution of butyrylated starch reached its maximum when the amylose content was 40 %, and the degree of substitution did not correlate linearly with the amylose content. The butyrylation reaction increased the surface roughness, decreased the crystallinity, enthalpy value and molecular weight of native starch granules, resulting in a decrease in the degree of internal order of the starch and inducing the rearrangement of the amylose molecular chains in the amorphous region of the starch. The combination of the amylose content and the substitution of butyryl groups on amylose affected the digestibility of starch and ultimately increased its resistance. The Pearson correlation coefficient further confirmed the correlation between the distribution of butyryl groups and the structure and properties of butyrylated starch.